ACS 110 Ansmann charger

The ANSMANN charger ACS110 is designed for 1-10 cell NiMH/NiCd battery packs with a voltage of 1.2V-12.0V. The device detects automatically the amount of the cells and adjusts the charging voltage automatically. A pre-discharge of the battery pack is optional, then it switches automatically to charging (charging current: 800mA / discharge current: 150mA - 200mA). Once the battery pack is fully charged, the charging current indicator lights green permanently. The charging process is cut-off automatically (-deltaV) and switches to trickle charging. With clear LED indication you can see if the battery pack is charging (LED flashes green) or discharging (LED lights yellow) or if there is an error (LED flashes red).

Included are one adapter cable with Tamiya socket, one adapter cable with crocodile clips and 8 standard output plugs for connecting in either polarity. The charger includes short-circuit and wrong polarity protection and is made for worldwide use (100-240V AC / 50-60Hz).
ANSMANN gives 3 years warranty on this product.

Charger from outlet controlled by microprocessor for battery packs NiCd/NiMH 1-10 cells (1, 2-12 V)

• Charger controlled by microprocessor with dump option
• Control of the trial of load defiance of the State and the load capacity and the size of the battery packs
• Charge of conservation
• Avoids the overload
• Detection of defective batteries
• Discharge button to unload the batteries and avoid the packs NiCd MEMORY effect
• 8 taken multiple type Jack
• crocodile clips
• Connector model Tamiya
• 3 year warranty