Charger balance IMAX B6 AC Lipo, NiMh, NiCd, lead

Specifications:

• Input: 110-240V, 50/60 Hz.
• Output: 12V 5A
• Maximum load Power 80W / Max. discharge 10W
• Charge current: 0.1 ~ 6.0 A
• Discharge current: 0.1 ~ 2 .0a
• Current Drain for Balancing Li - Po: 300mAh/cell
• Load items NiCd / NiMH: 1 to 15
• Charge Li-Polymer elements: 1 to 6 series
• Lead battery voltage: 2V to 20V
• Dimensions: 133 x 87 x 33 mm
• Net weight: 297g

Comes with cable 220V and a cable charge Dean, Bill, JR and Futaba

Balancer charger for 1-6 LiPo/Li-Ion/LiFe/LiHV elements,

Charge the batteries NiMh, NiCd 1.2V to 18V

The 2-4-6-8-10-12-14-16-18-20V lead batteries charged.

Double entry 12V and 220V power supply built-in

Imax B6 is a loader - unloader smart multifunction to load the batteries LiPo, Li-ion, LiFe, LiHv, NiCd, NiMh and lead. Equipped with an LCD display, this charger allows you to easily select all the parameters of the programs.

Maximum security:

Delta-Peak: the end of automatic load of the program works according to the principle of the delta-peak. (NiCd/NiMh)

The auto load current limit: when you load the NiCd or NiMh in auto mode, you can choose the maximum number of load current. This is very useful when you load batteries low impedance and small capacity in auto mode.

Capacity limit: the load capacity is always calculated by a multiple of the current load and time. If the load capacity exceeds the limit, the process ends automatically when the maximum value is reached.

Temperature limit: the temperature of the battery charge will increase by its internal chemistry. You can set a maximum temperature that will stop the charging process when it is exceeded

The process time limit: you can also restrict the maximum time of the process in order to avoid a possible problem.

Balance/balance :

catch the IMAX B6AC used to balancing LiPo batteries are JST XH type and are compatible with the vast majority of the LiPo of the market (Xpower, DUALSKY, 3rd model, ALIGN, Hi Model, Aeronuts,...)

Cycling:

1 to 5 charge/discharge cycles can be programmed to the refresh of the LiPo.

Record :

allows to save the settings of charge of a battery to find them more easily (up to 5 records)